5 ways to reduce the size of a PDF

We are often asked at One Legal how to reduce the size of a PDF filing to ensure that is accepted by a court’s case management system and therefore successfully eFiled.

There’s a whole range of rules out there on file sizes depending on what back-office system the court is using to manage the filings it receives. In most eFiling courts throughout the U.S. the file must be below 35 MB, for instance, all filings must be under 35 MB, whereas San Diego and Orange County accept individual documents up to 35 MB and a total for all documents of 60 MB. Checking the local rules in your court in advance is important.

In general, though, there’s very little reason for PDFs to be hundreds of megabytes large unless they contain exhibits that absolutely must be saved as very high-resolution photographs. By following just a few simple steps, even large filings that are hundreds of pages should not exceed 10 MB.

How to determine the size of your PDF document

If you’re using Adobe Acrobat, checking the size of your PDF is simple. Just click on File, then Properties. You’ll see lots of information about your document, including its size.

How to find the size of a PDF

Alternatively, you can navigate to the folder containing your document, right click on it, and click Properties.

Larger files will take longer to upload, are cumbersome to share electronically (via email, for instance), and will use up your law firm’s file storage more rapidly. Also, while the courts accept larger file sizes, they prefer to handle smaller, optimized files.

So, how should you set about reducing the size of your PDF documents? Here are five quick tips.

#1 Avoid scanning PDFs wherever possible

It’s a common misconception that, to create PDFs, or to combine multiple documents and exhibits into a single PDF, you need to to print everything out and scan it together. Electronically converted files are generally much smaller in size than scans.

You only ever need to scan documents that exist in paper form only — all other documents can be electronically converted from the original file by saving them as PDFs. Furthermore, individual documents can be quickly combined as PDFs using software such as Adobe Acrobat, avoiding any need to print out documents to combine them.

To learn more about Adobe Acrobat, check out our free guide “Core Adobe Acrobat skills for successful eFiling”.

#2 Save as “Reduced Size PDF”

If your file is still very large after you’ve created it electronically, rather than by scanning, there are still some steps you can take. The simplest is to re-save your file as a reduced-size PDF.

In the latest version of Adobe Acrobat, open the PDF you wish to re-save as a smaller file, choose File, Save as Other, and then Reduced Size PDF. You’ll be prompted to select the version compatibility you need and then you can click OK to save. We recommend setting your compatibility with at least Acrobat X, as that version is still widely used.

How to save as a reduced size PDF

This method is quick and simple but be warned that it will reduce the quality of images and will remove digital signatures. If you want more control over how your PDF is compressed in Acrobat, use the optimization method described below instead.

#3 Use Adobe Acrobat’s PDF Optimizer

Sometimes you’ll want more control over which elements of your document are reduced in quality or removed. In these circumstances, you should choose the PDF optimizer tool.

Before you optimize a file, it’s a good idea to audit the file’s space usage — review which elements, such as fonts, images, and so on, are using the most data. The results of this may give you ideas about where best to reduce file size.

To begin optimization, open your PDF in Acrobat, click File, Save as Other, and then Optimized PDF. In the dialog box that appears, click on Audit space usage in the top right-hand corner. You’ll see a table of information a bit like this:

How to optimize a PDF

The optimizer gives you complete control over the elements of your PDF that will be compressed. Select the checkbox next to a panel (e.g. Images, Fonts), and then select options in that panel. There’s a lot of choices, so it’s worth reading through the Adobe help file to understand what each option does.

Okay, we know that not everyone uses Adobe Acrobat. What options are available to you if you’re using other software or only the basic Adobe Reader? Here are two more options for reducing the size of your PDF file if you’re not using Acrobat.

#4 Reduce the size as you save in Word

In Word, to convert a document to PDF, you use the Save As option. This option generally produces a fairly small file, depending on the number of images in your document. However, if you find that your Word-converted PDF is still too large, there is a further option in Word that will produce a significantly smaller file. Here’s how to use it:

Open the Word document you are going to convert to PDF. Click on the File button and then Save As. In the Save as type menu, select PDF and enter your preferred file name. Here’s the extra step: where it says Optimize for at the bottom of the dialog box, select Minimum size (publishing online).

How to compress a PDF in Word

#5 Use a print-to-PDF tool

Other (non-Adobe) PDF tools generally contain features that will reduce the size of your PDF. However, if you’re looking for a free option, there are some available. Currently, the most downloaded free PDF creator (according to download.com) is PrimoPDF.

Once you’ve installed PrimoPDF, simply open the PDF you wish to compress (in Acrobat Reader, or a web browser, for example), press ctrl+P to open the print dialog, select PrimoPDF from the list of available printers, and then click Create PDF.

Note that this method, like simply saving as a reduced-size PDF in Adobe Acrobat, reduces image quality and resolution.

 

Tagged under:

4 Comments

  1. Kelly Reply

    I’ve tried all methods 2 and 3 for reducing a scanned PDF and never found them to work. #5 works for me occasionally but not consistently. Sometimes I end up with a scanned PDF that came to me electronically from an outside source, and nothing about the PDF’s length or content would indicate that it should be large, yet the file size will be huge. Those are the ones that resist any and all attempts to shrink them.

    1. Richard Heinrich Reply

      Hi Kelly,

      Thanks for commenting! It can be tricky to reduce the size of PDFs created by scanning papers and definitely frustrating to receive big files like this. Methods 2 and 3 will work best on PDFs created directly from word processing documents, but can still have a small affect on image-based PDFs. The best thing we can all do is educate others about how to produce optimized PDFs in the first instance!

      Richard

  2. Caleb Reply

    At work I create .pdf files from Word files all the time! While my colleague tells me it is not necessary to conserve digital file space because of our “gi-normous” servers, I can’t stand producing huge files when smaller options are available. First, the Word file using shrinks a lot (approx. %70) simply by converting to a .pdf. Once in .pdf (Adobe Acrobat Pro), I go to the “View” tab, then “Common Tools”, then “Create a Presentation”, then “Reduce File Size”. By doing this, my 13.6 MB Word file dropped to a 4.3 MB Adobe file, and then further reduced to a 1.2 MB Adobe file.

Leave a Reply to Tera Clark Cancel reply

Share your thoughts

(Your email is for verification only.)

*